fisher cz-6 quicksilver (m-scope) detector help

1 reply [Last post]
Wed, 12/07/2011 - 2:23pm
robert murray's picture
robert murray
Offline
First hunt
Joined: 12/07/2011
Printer-friendly versionSend by email

hi i just got a fisher cz-6 quicksilver metal detector and im haveing trouble.i was wandering if anyone on here uses or has used one of these.i find lots of new clad money like dimes and pennys but have trouble finding quarters(clad),silver,rings or old indian heads.am i doing something wrong.i ground balance but just dont find anything of significant value.if anyone has any info or good dial combonations please help.thanks

Top
Thu, 12/08/2011 - 2:12am
#1
danhughes's picture
danhughes
Offline
First huntFilling a cofee can or twoCould use a few more storage tubsThe garage is looking smaller all the timeMaybe it's time to contact the museum
Joined: 12/06/2009
Robert, I used a CZ-6 for

Robert, I used a CZ-6 for several years, and I now use a CZ-5, which is the same except it has a speaker and a regular headphone jack.If you're finding new coins, the detector is working fine.  You might go a long time before you find old coins.  The trick is that in order to find old coins, you have to be hunting places where people gathered half a century ago, not where they gather today.  You won't find old coins in school playgrounds, but you will in the yards of older houses near downtown areas. Check out my podcasts - many of them give you tips on finding older coins.  They are at http://thetreasurecorner.com. ---Dan Hughes

---Dan Hughes, http://treasuremanual.com

Top