mxt can not find gold

3 replies [Last post]
Sat, 02/20/2010 - 1:01pm
bigrichard's picture
bigrichard
Offline
First huntFilling a cofee can or twoCould use a few more storage tubsThe garage is looking smaller all the time
Joined: 02/19/2010
Printer-friendly versionSend by email

what setings should I use to find gold rings and jewlry.

Top
Sun, 02/21/2010 - 6:14pm
#1
coinfinder_20010's picture
coinfinder_20010
Offline
First huntFilling a cofee can or two
Joined: 02/18/2010
reply

I use the ring pull tab range on my detector you will find alot of foil and pull tabs but it pays off at the end.........$$$$$$$

coinfinder_2010

Top
Sun, 02/21/2010 - 5:54am
#2
bigrichard's picture
bigrichard
Offline
First huntFilling a cofee can or twoCould use a few more storage tubsThe garage is looking smaller all the time
Joined: 02/19/2010
thanks for the info carl la

I will give this A try when it gets warmer hear michaign.

Top
Sat, 02/20/2010 - 8:46pm
#3
Carl La's picture
Carl La
Offline
First hunt
Joined: 12/03/2009
I had the MXT for two years

I had the MXT for two years before getting the V3. It is a gold ring finding machine. I put the gain at 9 or 10 and the disc at 2 or 2 1/2 then dig everything. I used the 6 X 10 DD coil with that setup. You will get lots of pulltabs, beaver tails and foil but in amonst that you will find the gold. Hope this helps you out some.

Top